3 adjustable poles
Poles and fixtures
Create and install your shaded space wherever you want with this 3-pole-kit! It is adapted to triangular shade sails. Ropes, pulleys and slides are included. With this 3 poles you can install a shade sail wherever you want. This pack is made for a sail shade made with 3 angles.
3 Adjustable Poles
This 3 adjustable poles kit guarantees a resistant and design installation.
With this 3 poles you can install a shade sail wherever you want.
On the practical side, it is removable : remove it easily in winter and slip it into its base in the spring !
The tension system with ropes + pulleys is included
Technical characteristics :
Height : 2,60 m
Pole material : 3mm thick anodic oxidation treated 25 microns aluminum (resists to saline environments).
Diameter : 10 x 80mm (oval)
Weight : 14 to 20 kg depending on the base.
Guarantee : 2 years
Made in France
Tension system : The “reinforced” tension system (for Australe 340 and Acryl 300) contains 2 double pulleys versus 2 simple pulleys for the “standard” version. The double pulleys can host an additional rope loop between the sail and pole: this facilitates the tension of the sail and renders the installation more resistant.
To be screwed
For hard surfaces such as concrete slabs or wooden patios
2 versions: vertical or inclined (82°).
(Length of the tube: 50 cm)
To be sealed (sheath + tube)
The tube is 1m long and the pole is 3m long.
It brings more solidity to the structure.
Matter: Galvanized steel
To support a pole against a wall (2 baseplates per pole).
Matter: Stainless steel
Included accessories :
- 3 Adjustable poles
- 3 Slides
- 3 Tension systems
- 3 sheaths + 3 tubes or 3 galvanized steel round bases or 9 mural baseplates
More information here.
For the “sealed sheath” version :
Create a 60 to 80cm deep and 40cm wide concrete slab into which the sheath will be sealed. The bigger the slab, the mire stable the pole;
Insert the pole (including the steel tube of 1m).
|Then, insert the mast (containing its 100cm aluminium reinforcement) into the sheath.
Tip : opt for fast drying concrete for an easier installation.
For the screwed version :
Plan 4 bolts and 4 shredded shanks of 12 mm diameter and 200 mm length in order to fix the base. Drill with a concrete drill bit to 14 and a chemical selling.
|Slide the pole on the tube.
For the wall baseplates version :
Plan 4 bolts and 4 shredded shanks of 8 to 10 mm diameter and 100mm length in order to secure the 2 baseplates (2 anchor points per baseplate).
Ensure a minimum space of 70cm between the 2 baseplates.
Make a chemical seal