- Weight :
Roll out and put away your shade sail easily
A roller shade sail provides an indisputable advantage to wind-exposed locations. Depending on the conditions, you can easily roll up your shade sail in order to protect it. Its water repellant canvas, that filters 97% of UVs is dyed with no harmful substances and resists discoloration.
The Acryl 300 old riggings roller shade sail is a 100% acrylic waterproof shade sail of 300 g/m².
This sail offer a neat finish from nautical fabrication methods.
It’s roller system allows it to retract or deploy very easily in less than a minute. This sail is ideal for wind-exposed patios. .
Fabric features :
Some advices :
The Acryl 300 old riggings roller shade sail is adapted to moderate winds (up to 60km/h).
During installation, create a 20% incline between the different fixture points to allow rainwater evacuation. For example, if the side of your sail measures 300 cm, you must create an incline of 60 cm (300 x 0,2).
The Acryl 300 fabric is water repellant, thus water will glide on it instead of immersing itself and pouring through it. This is only accurate if a 20% incline is created and the tension is adequate. . Otherwise, a water pouch will create on the sail.
The sail seams are none waterproof..
The fixture points must always be situated in the continuation of the shade sail diagonals :
Plan a margin of at least 45 cm in these diagonals for the fixtures to exert sufficient tension.
The sides of the shade sail are curved. This allows a good shade tension without creases.
The size of the shade sail can vary from +/-3% with the given size, because of the elasticity of the fabric, the fabrication process, and the tension brought to the sail.
Difference between the 300 x 400 x 500 cm and 500 x 400 x 300 cm ?
The sail has a side that is determined by the way you will install it :
From above :
(the sizes are given clockwise)
Sail 500 x 400 x 300 cm Sail 300 x 400 x 500 cm
|=> The same goes for the 400 x 500 x 640 cm and 640 x 500 x 400 cm sails|
For the fixture choice :
We have created fixture kits that contain all the necessary material to install your sail according to the desired configuration.
|Kits with shade sails: to tighten your shade sail exclusively between walls.||Kit with poles: to tighten your shade sail between a wall and poles.|
These kits are designed to facilitate your choice and ensure you have all the elements for a successful installation. .