- Reduced price
- Reduced price
Quality, flexibility, and design
If you are searching for a material solution combining quality, flexibility, and design to tighten your shade sail, the adjustable pole is made for you! it can be fixed into the ground or to a wall, which leaves a large array of configuration possibilities for an ideally protected patio. With its slide, you will be able to adjust the position of the protective canvas according to the sun and the incline of its rays in order to maximize the shade sail benefit.
This anodised aluminum pole guarantees a resistant and design installation.
Its slide allows you to set the incline of your sail according to the course of the sun, to create shade all day long.
On the practical side, it is removable : remove it easily in winter and slip it into its base in the spring !
The tension system with ropes + pulleys is included
Technical characteristics :
Height : 2,60 m
Base material :
Diameter : 10 x 7 cm (oval)
Made in France
Tension system : The “reinforced” tension system (for Australe 340 and Acryl 300) contains 2 double pulleys versus 2 simple pulleys for the “standard” version. The double pulleys can host an additional rope loop between the sail and pole: this facilitates the tension of the sail and makes the installation more resistant.
To be screwed
for hard surfaces such as concrete slabs or wooden patios
2 versions: vertical or inclined.
(Length of the tube: 50 cm)
To be sealed (sheath + tube)
The tube exists in 1,20m version or 2,60m version: it will bring additional solidity along the entire pole length, it is recommended for installations with multiple sails and/or wind exposure.
To support a pole against a wall (3 baseplates per pole).
Included accessories :
|The Cleat allows a neat arrangement of the excess rope.
| Sheath cap (exclusively for the sealed base) that will close the hole in the ground when you remove the pole.
A pole that adapts to your needs with 3 different installations :
With the screw version : the pole is delivered with a 22cm diameter galvanized steel round base with a 12cm space between each hole. A 50cm high tube welded onto the base serves as a support for the pole. This tube can be straight (90º base) or inclined (75º base) to give a dynamic aspect to your installation. Careful, in the case of 2 sails tied to the same pole, we recommend choosing a 90º base to respect the tension axis of the 2 sails.
With the sealed sheath version : the pole is delivered with a 50cm long aluminum sheath to be sealed in a concrete slab and a steel tube of 1,20m or 2,70m to be slide in the sheath. The sheath is straight cut on one side and beveled on the other to give an inclination, or not, to the pole.
With the wall baseplate version : the pole is delivered with 3 stainless steel bases to be fixed to a resistant wall with a minimum distance of 70cm between the 2 farthest bases. Plan 4 holes per base.
Resistant and design :
In anodised aluminum of 3mm thickness, the adjustable pole guarantees a durable, resistant, and aesthetic installation.
The tension system, composed of rot-resistant ropes and stainless steel pulleys is directly inspired of the marine world: it ensures an excellent traction resistance and gives a “nautical” aspect to your installation.
The provided rope allows for an up to 2m50 space between the pole and the sail.
Practical for day-to-day use :
The pole contains a slide mounted on tracks to adjust the sail height and incline. You can adjust the sail height to the sun throughout the day. Enjoy shade all day !
The cleat allows a neat arrangement of the excess rope.
Removable : remove it easily during the winter and slide it into its base when the sunny days are back! The pole is removable in the sealed and screwed version.
For the “sealed sheath” version :
|Create a 60cm deep and 40cm wide concrete slab into which the sheath will be sealed. The bigger the slab, the more stable the pole.||Insert the 1m20 (or 2m70 for the reinforced version) steel tube in the sheath. Finally, slide the pole on the tube.|
Tip : opt for fast drying concrete for an easier installation.
For the screwed version :
For the wall baseplates version :