Roll out and put away your shade sail easily
A roller shade sail provides an indisputable advantage to wind-exposed locations. Depending on the conditions, you can easily roll up your shade sail in order to protect it. Its water repellant canvas, that filters 97% of UVs is dyed with no harmful substances and resists discoloration.
The roller Acryl 300 shade sail is a 100% acrylic waterproof shade sail of 300 g/m².
Its roller system, directly inspired from the nautical world, allows it to retract or deploy very easily in less than a minute. This sail is ideal for wind-exposed patios. .
Fabric features :
UV filtration of 97%
300g/m² fabric weight
Mass dye for better color resistance
Excellent traction resistance
Efficient rain protection (seams none waterproof)
Fabrication guaranteed without toxic substances
Fabric guarantee: 5 years
Seam and strap guarantee: 2 years
Mechanism composed of a stainless steel toothed pulley with swivel.
Roller with an “endless” rope
Roller mechanism guarantee: 2 years
Contents of an Acryl 300 with Roller
The Acryl 300 sail
The manoeuvrer rope (two-meter-long)
Roller mechanism (swivel, tooth pulley, endless rope, guide ring, elastic, stainless cleat and sandaw).
Features needed for a proper installation
To install your sail in the best condition, we recommend you choose these tension systems:
- 1 short tension system in the « endless rope » side
- 1 reinforced tension system in the opposite angle of the roller
- Standard tension systems in the other angles (1 if triangle and 2 if quadrilateral).
These tension systems can suit any type of fixtures (walls or poles).
Here is a tutorial video to show you step by step the installation of a Roller Shade Sail:
Available sizes and winding axis position (in yellow) - from above:
You would like another size ? You can create a custom shade sail roller in Acryl 300 with the use if the Custom sail shade tool on line.
Some tips :
The Acryl 300 solar shade is adapted to moderate winds (max 60km/h).
During installation, create a 25% incline between the different fixture points to allow rainwater evacuation. For example, if the side of your sail measures 300 cm, you must create an incline of 75 cm (300 x 0,25).
The Acryl 300 fabric is water repellent, thus water will glide on it instead of immersing itself and pouring through it. This is true only if a 25% incline is created and the tension is adequate. . Otherwise, a water pouch will create on the sail.
The size of the shade sail can be up to +/-5% of the expected size due to the elasticity of the fabric and the manufacturing process.
The sail seams are none waterproof..
The fixture points must always be situated in the continuation of the shade sail diagonals :
Plan a margin of at least 45 cm in these diagonals for the fixtures to exert sufficient tension.
The sides of the shade sail are curved. This allows a good shade tension without creases.
The size of the shade sail can vary from +/-5% with the given size, because of the elasticity of the fabric, the fabrication process, and the tension brought to the sail.
Difference between the 640 x 500 x 400 cm and 400 x 500 x 640 cm ?
The sail has a side that is determined by the way you will install it :
From above :
(the sizes are given clockwise)
Sail 640 x 500 x 400 cm Sail 400 x 500 x 640 cm